Low-pressure (vacuum infusion) techniques for moulding large composite structures, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol.42, issue.5, pp.45-58, 2005. ,
DOI : 10.1016/S0034-3617(97)84296-8
Resin Infusion under Flexible Tooling (RIFT): a review, Composites Part A: Applied Science and Manufacturing, vol.27, issue.7, pp.517-524, 1996. ,
DOI : 10.1016/1359-835X(96)00008-5
Simulation of liquid resin infusion process by finite element method, 15th European conference on composite materials, 2012. ,
Industrial simulation of liquid resin infusion by the finite element method, 19th international conference on composite materials, 2013. ,
Monitoring variations in laminate properties through the complete resin infusion process, Proceedings of SAMPE: From art to science: Advancing materials & process engineering conference, 2007. ,
URL : https://hal.archives-ouvertes.fr/hal-02070863
Exploring the potential for laminate quality control using VARTM, Proceedings of 36th international SAMPE technical conference, pp.15-18, 2004. ,
The implications of fiber compaction and saturation on fully coupled VARTM simulation, Composites Part A: Applied Science and Manufacturing, vol.35, issue.2, pp.159-169, 2004. ,
DOI : 10.1016/j.compositesa.2003.02.001
Simulation Based Solutions for Industrial Manufacture of Large Infusion Composite Parts, SAE Technical Paper Series, 2014. ,
DOI : 10.4271/2014-01-0965
Reduction of void content of vacuum-assisted resin transfer molded composites by infusion pressure control, Polymer Composites, vol.47, issue.12, pp.1629-1637, 2015. ,
DOI : 10.1177/0021998312448500
Preform characterization in VARTM process model development. NASA Technical Reports Server, 2004. ,
Compaction of e-glass fabric preforms in the vacuum infusion process: (a) use of characterization database in a model and (b) experiments, Journal of Composite Materials, vol.20, issue.1 ,
DOI : 10.1016/j.compositesa.2007.01.012
, J Compos Mater, vol.47, pp.1959-1975, 2013.
Variation of part thickness and compaction pressure in vacuum infusion process, Composites Science and Technology, vol.69, issue.11-12, pp.1710-1719, 2009. ,
DOI : 10.1016/j.compscitech.2008.05.009
Pressure-controlled compaction characterization of fiber preforms suitable for viscoelastic modeling in the vacuum infusion process, Journal of Composite Materials, vol.20, issue.9, pp.1209-1224, 2017. ,
DOI : 10.1016/S1000-9361(08)60048-5
Simulation of the reinforcement compaction and resin flow during the complete resin infusion process, Composites Part A: Applied Science and Manufacturing, vol.41, issue.1, pp.45-57, 2010. ,
DOI : 10.1016/j.compositesa.2009.07.007
URL : https://hal.archives-ouvertes.fr/hal-02070802
Experimental Study of Thickness Gradient Formation in the VARTM Process, Materials and Manufacturing Processes, vol.17, issue.4, pp.607-627, 2005. ,
DOI : 10.1002/pc.10091
Flow and compaction during the vacuum assisted resin transfer molding process In: 33rd international SAMPE technical conference -Advancing affordable materials technology, pp.5-8, 2001. ,
Modeling and analysis of thickness gradient and variations in vacuum-assisted resin transfer molding process, Polymer Composites, vol.206, issue.5, pp.473-482, 2008. ,
DOI : 10.1002/pc.20439
Correlation of void distribution to VARTM manufacturing techniques, Composites Part A: Applied Science and Manufacturing, vol.38, issue.3, pp.802-813, 2007. ,
DOI : 10.1016/j.compositesa.2006.08.005
Exploring the potential for laminate quality control using VARTM, Proceedings of 36th international SAMPE technical conference, pp.15-18, 2004. ,
Modeling of post-filling stage in vacuum infusion using compaction characterization, Journal of Composite Materials, vol.15, issue.16, pp.1947-1960, 2015. ,
DOI : 10.1016/S1359-835X(00)00067-1
Experimental study of the microvoids formation and transport in the vacuum assisted resin transfer molding process, 2002. ,
Micro scale flow behavior and void formation mechanism during impregnation through a unidirectional stitched fiberglass mat, Polymer Engineering and Science, vol.12, issue.10, pp.837-851, 1995. ,
DOI : 10.1002/pen.760351006
Experimental investigation of flow-induced microvoids during impregnation of unidirectional stitched fiberglass mat, Polymer Composites, vol.33, issue.2, pp.161-170, 1996. ,
DOI : 10.1016/0009-2509(78)85004-0
Influence of processing and material variables on resin-fiber interface in liquid composite molding, Polymer Composites, vol.53, issue.2, pp.161-172, 1993. ,
DOI : 10.5962/bhl.title.35895
Unified saturation and micro-macro voids method in Liquid Composite Molding, International Journal of Material Forming, vol.329, issue.7, pp.937-940, 2008. ,
DOI : 10.1177/002199839202601006
URL : https://hal.archives-ouvertes.fr/hal-01942820
Experimental Investigation of the Controlled Atmospheric Pressure Resin Infusion (CAPRI) Process, Journal of Composite Materials, vol.19, issue.4, pp.1049-1061, 2008. ,
DOI : 10.1002/pc.10553
Identifying sources of variability in the mechanical performance of resin infused textile composites, The 9th international conference on textile composites (TexComp9), 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-02070848
Simulation of the complete resin infusion process, The 9th international conference on flow processes in composite materials (FPCM-9), 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-02070825
Autocatalytic curing kinetics of thermosetting polymers: A new model based on temperature dependent reaction orders, Polymer, vol.51, issue.16, pp.3814-3820, 2010. ,
DOI : 10.1016/j.polymer.2010.05.056
Modeling the effect of the curing conversion on the dynamic viscosity of epoxy resins cured by an anhydride curing agent, Journal of Applied Polymer Science, vol.39, issue.3 ,
DOI : 10.1177/0021998305048738
, J Appl Polym Sci, vol.115, pp.1671-1674, 2010.
Digital stereophotogrammetric system, Int Arch Photogramm Rem Sens, vol.25, pp.1-7, 1984. ,
Full field monitoring of the resin flow and laminate properties during the resin infusion process, Composites Part A: Applied Science and Manufacturing, vol.39, issue.9, pp.1412-1426, 2008. ,
DOI : 10.1016/j.compositesa.2008.05.005
URL : https://hal.archives-ouvertes.fr/hal-02070810
, Modulus SH. PRIME TM 20LV epoxy infusion system, 2010.
Advanced numerical simulation of liquid composite molding for process analysis and optimization, Composites Part A: Applied Science and Manufacturing, vol.37, issue.6, pp.890-902, 2006. ,
DOI : 10.1016/j.compositesa.2005.06.003
Modeling and simulation of voids and saturation in liquid composite molding processes, Composites Part A: Applied Science and Manufacturing, vol.42, issue.6, pp.658-668, 2011. ,
DOI : 10.1016/j.compositesa.2011.02.005
URL : https://hal.archives-ouvertes.fr/hal-01942602
Evaluation of a variety of vacuum assisted resin infusion processes, 21st international conference on composite materials (ICCM-21), Xi'an, China, pp.20-25, 2017. ,