E. A. Abdelaziz, R. Saidur, and S. Mekhilef, A review on energy saving strategies in industrial sector, Renewable and Sustainable Energy Reviews, vol.15, issue.1, pp.150-168, 2011.
DOI : 10.1016/j.rser.2010.09.003

H. Akbari and O. Sezgen, Analysis of energy use in building services of the industrial sector in California: two case studies, Energy and Buildings, vol.19, issue.2, pp.133-141, 1992.
DOI : 10.1016/0378-7788(92)90007-4

. Al-ajmi, F. Farraj, and V. I. Hanby, Simulation of energy consumption for Kuwaiti domestic buildings, Energy and Buildings, vol.40, issue.6, 2008.
DOI : 10.1016/j.enbuild.2007.10.010

E. Asadi, M. Gameiro-da-silva, C. H. Antunes, and L. Dias, A multi-objective optimization model for building retrofit strategies using TRNSYS simulations, GenOpt and MATLAB, Building and Environment, vol.56, pp.370-378, 2012.
DOI : 10.1016/j.buildenv.2012.04.005

F. Ascione, N. Bianco, C. D. Stasio, G. M. Mauro, and G. P. Vanoli, Artificial neural networks to predict energy performance and retrofit scenarios for any member of a building category: A novel approach, Energy, vol.118, pp.118-999, 2017.
DOI : 10.1016/j.energy.2016.10.126

A. Azadeh, S. F. Ghaderi, and S. Sohrabkhani, Annual electricity consumption forecasting by neural network in high energy consuming industrial sectors, Energy Conversion and Management, vol.49, issue.8, pp.2272-2278, 2008.
DOI : 10.1016/j.enconman.2008.01.035

H. Breesch and A. Janssens, Performance evaluation of passive cooling in office buildings based on uncertainty and sensitivity analysis, Solar Energy, vol.84, issue.8, pp.1453-1467, 2010.
DOI : 10.1016/j.solener.2010.05.008

J. Brühlmeier, J. Penasa, K. Egger, J. Chapallaz, P. Mouchet et al., Récupération de chaleur dans les bâtiments d'élevage. Berne; Lausanne (case postale 12, 1015): Office fédéral des questions conjoncturelles ; diffusion: Coordination romande du programme d'action " Construction et énergie, 1996.

A. Capozzoli, D. Grassi, M. Savino-piscitelli, and G. Serale, Discovering Knowledge from a Residential Building Stock through Data Mining Analysis for Engineering Sustainability, Energy Procedia, vol.83, pp.370-379, 2015.
DOI : 10.1016/j.egypro.2015.12.212

R. Chargui and H. Sammouda, Modeling of a residential house coupled with a dual source heat pump using TRNSYS software, Energy Conversion and Management, vol.81, pp.384-399, 2014.
DOI : 10.1016/j.enconman.2014.02.040

D. Chinese, G. Nardin, and O. Saro, Multi-criteria analysis for the selection of space heating systems in an industrial building, Energy, vol.36, issue.1, pp.556-565, 2011.
DOI : 10.1016/j.energy.2010.10.005

F. Collectif, Guide Construction Métallique Réglementation Thermique Des Bâtiments Neufs -RT, 2005.

M. Dongellini, C. Marinosci, and G. L. Morini, Energy Audit of an Industrial Site: A Case Study, Energy Procedia, vol.45, pp.424-433, 2014.
DOI : 10.1016/j.egypro.2014.01.046

L. Filogamo, G. Peri, G. Rizzo, and A. Giaccone, On the classification of large residential buildings stocks by sample typologies for energy planning purposes, Applied Energy, vol.135, pp.825-835, 2014.
DOI : 10.1016/j.apenergy.2014.04.002

M. Gangolells, M. Casals, N. Forcada, M. Macarulla, and E. Cuerva, Energy mapping of existing building stock in Spain, Journal of Cleaner Production, vol.112, pp.3895-3904, 2016.
DOI : 10.1016/j.jclepro.2015.05.105

B. L. Gowreesunker, S. A. Tassou, and M. Kolokotroni, Coupled TRNSYS-CFD simulations evaluating the performance of PCM plate heat exchangers in an airport terminal building displacement conditioning system, Building and Environment, vol.65, pp.132-145, 2013.
DOI : 10.1016/j.buildenv.2013.04.003

D. M. Hamby, A review of techniques for parameter sensitivity analysis of environmental models, Environmental Monitoring and Assessment, vol.64, issue.2, pp.135-154, 1994.
DOI : 10.2172/7091452

A. Ioannou and L. C. Itard, Energy performance and comfort in residential buildings: Sensitivity for building parameters and occupancy, Energy and Buildings, vol.92, pp.216-233, 2015.
DOI : 10.1016/j.enbuild.2015.01.055

D. Katunsky, A. Korjenic, J. Katunska, M. Lopusniak, S. Korjenic et al., Analysis of thermal energy demand and saving in industrial buildings: A case study in Slovakia, Building and Environment, vol.67, pp.138-146, 2013.
DOI : 10.1016/j.buildenv.2013.05.014

. Khayatian, L. Fazel, G. Sarto, and . Dall-'o-'., Application of neural networks for evaluating energy performance certificates of residential buildings, Energy and Buildings, vol.125, pp.45-54, 2016.
DOI : 10.1016/j.enbuild.2016.04.067

S. A. Klein, TRNSYS 17: A Transient System Simulation Program, 2010.

G. Krauss, B. Lips, J. Virgone, and E. Blanco, Modélisation Sous TRNSYS D'une Maison À Énergie Positive, IPBSA Conference, 2006.

K. Lomas and H. Eppel, Sensitivity analysis techniques for building thermal simulation programs, Energy and Buildings, vol.19, issue.1, pp.21-44, 1992.
DOI : 10.1016/0378-7788(92)90033-D

I. A. Macdonald, Comparison of Sampling Techniques on the Performance of Monte-Carlo Based Sensitivity Analysis, Eleventh International IBPSA Conference, pp.992-999, 2009.

A. P. Melo, D. Cóstola, R. Lamberts, and J. L. Hensen, Development of surrogate models using artificial neural network for building shell energy labelling, Energy Policy, vol.69, pp.457-466, 2014.
DOI : 10.1016/j.enpol.2014.02.001

X. Meng, Y. Wang, T. Liu, X. Xing, Y. Cao et al., Influence of radiation on predictive accuracy in numerical simulations of the thermal environment in industrial buildings with buoyancy-driven natural ventilation, Applied Thermal Engineering, vol.96, pp.473-480, 2016.
DOI : 10.1016/j.applthermaleng.2015.11.105

. Mirade, B. Pierre-sylvain, H. Perret, D. Guillemin, B. Picque et al., Quantifying energy savings during cheese ripening after implementation of sequential air ventilation in an industrial cheesemaking plant, Energy, vol.46, issue.1, pp.248-258, 2012.
DOI : 10.1016/j.energy.2012.08.026
URL : https://hal.archives-ouvertes.fr/hal-01019500

M. Reports, La Construction de Bâtiments Non Résidentiels En France : Nouveaux Enjeux, 2013.

N. En, Ventilation for Non-Residential Buildings Performance Requirements for Ventilation and Room-Conditioning Systems, 2009.

N. En-iso-7730, Analytical Determination and Interpretation of Thermal Confort Using Calculation of the PMV and PPD Indices and Local Thermal Comfort Criteria Heat Transfer via the Ground, 2006.

. Olivia, T. Guerra-santin, and . Christopher, In-use monitoring of buildings: An overview and classification of evaluation methods, Energy and Buildings, vol.86, pp.176-189, 2015.
DOI : 10.1016/j.enbuild.2014.10.005

L. Pérez-lombard, J. Ortiz, and C. Pout, A review on buildings energy consumption information, Energy and Buildings, vol.40, issue.3, pp.394-398, 2008.
DOI : 10.1016/j.enbuild.2007.03.007

D. Prando, Globla Sensitivity Analysis of the Building Energy Performance and Correlation Assessment of the Design Parameters, 2011.

M. N. Said, Measurements of air change rates and air flow patterns in large single-cell buildings, Energy and Buildings, vol.26, issue.2, pp.175-182, 1997.
DOI : 10.1016/S0378-7788(96)01032-8

M. N. Saïd, R. A. Macdonald, and G. C. Durrant, Measurement of thermal stratification in large single-cell buildings, Energy and Buildings, vol.24, issue.2, pp.105-115, 1996.
DOI : 10.1016/0378-7788(95)00966-3

S. Schimschar, J. Grözinger, H. Korte, T. Boermans, V. Lilova et al., Panorama of the European Non-Residential Construction Sector, The Open Group Architecture Framework (TOGAF) TOGAF: Http://Www. Opengroup. Org/Togaf, 2011.

N. Simões and C. Serra, Ground contact heat losses: Simplified calculation method for residential buildings, Energy, vol.48, issue.1, pp.66-73, 2012.
DOI : 10.1016/j.energy.2012.04.013

C. Spitz, L. Mora, E. Wurtz, and A. Jay, Practical application of uncertainty analysis and sensitivity analysis on an experimental house, Energy and Buildings, vol.55, pp.459-470, 2012.
DOI : 10.1016/j.enbuild.2012.08.013

W. Tian, A review of sensitivity analysis methods in building energy analysis, Renewable and Sustainable Energy Reviews, vol.20, pp.411-419, 2013.
DOI : 10.1016/j.rser.2012.12.014

S. Tsoka, Optimizing Indoor Climate Conditions in a Sports Building Located in Continental Europe, Energy Procedia, vol.78, pp.2802-2807, 2015.
DOI : 10.1016/j.egypro.2015.11.630

K. Valan?ius, V. Motuzien?, and S. Paulauskait?, Redeveloping industrial buildings for residential use: Energy and thermal comfort aspects, Energy for Sustainable Development, vol.29, pp.38-46, 2015.
DOI : 10.1016/j.esd.2015.09.004

P. Valdiserri, C. Biserni, G. Tosi, and M. Garai, Retrofit Strategies Applied to a Tertiary Building Assisted by Trnsys Energy Simulation Tool, Energy Procedia, vol.78, pp.765-770, 2015.
DOI : 10.1016/j.egypro.2015.11.091

X. Wang, C. Kendrick, R. Ogden, N. Walliman, and B. Baiche, A case study on energy consumption and overheating for a UK industrial building with rooflights, Applied Energy, vol.104, pp.337-344, 2013.
DOI : 10.1016/j.apenergy.2012.10.047

Y. Wang, K. K. Wong, H. Du, J. Qing, and J. Tu, Design configuration for a higher efficiency air conditioning system in large space building, Energy and Buildings, vol.72, pp.167-176, 2014.
DOI : 10.1016/j.enbuild.2013.12.041

M. Wetter, GenOpt: Generic Optimization Program, User Manual Version 3.0.0, 2009.
DOI : 10.2172/962948
URL : https://digital.library.unt.edu/ark:/67531/metadc928732/m2/1/high_res_d/962948.pdf

H. Zhao and F. Magoulès, A review on the prediction of building energy consumption, Renewable and Sustainable Energy Reviews, vol.16, issue.6, pp.3586-3592, 2012.
DOI : 10.1016/j.rser.2012.02.049
URL : https://hal.archives-ouvertes.fr/hal-00802029